https://usedelectricguitars.org Mon, 28 Sep 2026 03:08:29 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://usedelectricguitars.org/2026/09/25/4-string-bass-semi-finished-project-mahogany-body-rosewood-fingerboard-neck/ https://usedelectricguitars.org/2026/09/25/4-string-bass-semi-finished-project-mahogany-body-rosewood-fingerboard-neck/#comments Sat, 26 Sep 2026 03:00:48 +0000 https://usedelectricguitars.org/2026/09/25/4-string-bass-semi-finished-project-mahogany-body-rosewood-fingerboard-neck/






















4 String Bass Semi Finished Project, Mahogany Body, Rosewood Fingerboard Neck. Mahogany neck, rosewood fingerboard, 20 frets, custom inlays, finely finished frets. Healthy neck, adjustable iron, one-piece connection.

]]> https://usedelectricguitars.org/2026/09/25/4-string-bass-semi-finished-project-mahogany-body-rosewood-fingerboard-neck/feed/ 0 https://usedelectricguitars.org/2026/09/17/guitar-neck-straightener-repair-tool-professional-easy-to-use-multifunctional/ https://usedelectricguitars.org/2026/09/17/guitar-neck-straightener-repair-tool-professional-easy-to-use-multifunctional/#comments Thu, 17 Sep 2026 10:03:41 +0000 https://usedelectricguitars.org/2026/09/17/guitar-neck-straightener-repair-tool-professional-easy-to-use-multifunctional/


Guitar neck fingerboard corrector, or Heating tool electric guitar neck deformation, bending correction straightening tool. Product Name: Guitar Neck Fingerboard corrector. Product application: It is used to correct the bending and deformation of the fingerboard of the guitar neck. It is suitable for all kinds of guitars, including basses, and can be used for overall neck correction or local correction. Product usage: Before calibration, you can adjust the neck steel bar to the middle position where no force is applied. According to the position of the neck deformation and distortion, the entire neck can be corrected. Local deformation correction is also possible, and the specific adjustment should be made according to the actual situation. Tighten the loosening screws of the corrector. Depending on the degree of deformation, it can be corrected in stages and multiple times to avoid excessive deformation in one correction, which may cause the neck fingerboard to crack. According to the degree of neck deformation and the temperature and humidity of the surrounding environment, you can adjust the temperature by yourself. Generally, a temperature range of around 60°C to 120 °C is acceptable. The correction time can be controlled by yourself according to the temperature you set or the degree of neck deformation. Generally, it takes tens of minutes or several hours.

]]> https://usedelectricguitars.org/2026/09/17/guitar-neck-straightener-repair-tool-professional-easy-to-use-multifunctional/feed/ 0 https://usedelectricguitars.org/2026/09/12/8-string-unfinished-diy-mandolin-spruce-top-body-maple-neck-24-frets/ https://usedelectricguitars.org/2026/09/12/8-string-unfinished-diy-mandolin-spruce-top-body-maple-neck-24-frets/#comments Sat, 12 Sep 2026 09:41:42 +0000 https://usedelectricguitars.org/2026/09/12/8-string-unfinished-diy-mandolin-spruce-top-body-maple-neck-24-frets/


















Specifications: 8 strings, total length 69.90CM, effective distance 354MM. Material: Natural wood-colored spruce veneer top + solid maple body – all veneer configuration. Rosewood fingerboard, 24 frets – acoustic version, 8-string, no accessories, no paint or frets, suitable for personal DIY assembly. Made in Korea, genuine original product.

]]> https://usedelectricguitars.org/2026/09/12/8-string-unfinished-diy-mandolin-spruce-top-body-maple-neck-24-frets/feed/ 0 https://usedelectricguitars.org/2026/09/09/custom-diy-project-4-string-bass-okoume-ash-mahogany-body-neck-through-neck/ https://usedelectricguitars.org/2026/09/09/custom-diy-project-4-string-bass-okoume-ash-mahogany-body-neck-through-neck/#comments Wed, 09 Sep 2026 21:31:42 +0000 https://usedelectricguitars.org/2026/09/09/custom-diy-project-4-string-bass-okoume-ash-mahogany-body-neck-through-neck/






















Configuration: Solid ash and mahogany body – top has dents and scratches; Canadian maple and Indian rosewood core; solid neck with 5 frets; 24-fret rosewood fingerboard; solid diameter construction; black headstock with logo; no metal fittings. Two slotted bass pickups, suitable for DIY enthusiasts. Note: Authentic original, Taiwan factory stock. The guitar body has dents and scratches, some seam cracks, and glue residue on the rosewood fingerboard. The biggest flaw is a stripped neck adjustment iron thread – it cannot be adjusted.

]]> https://usedelectricguitars.org/2026/09/09/custom-diy-project-4-string-bass-okoume-ash-mahogany-body-neck-through-neck/feed/ 0 https://usedelectricguitars.org/2026/08/31/jvg-luthierbuilt-st-neck-aged-nitro-lacquer-patina-rosewood-fb-jvgutars/ https://usedelectricguitars.org/2026/08/31/jvg-luthierbuilt-st-neck-aged-nitro-lacquer-patina-rosewood-fb-jvgutars/#comments Mon, 31 Aug 2026 20:56:41 +0000 https://usedelectricguitars.org/2026/08/31/jvg-luthierbuilt-st-neck-aged-nitro-lacquer-patina-rosewood-fb-jvgutars/




JVG- LuthierBuilt ST style vintage style looking Neck with a ROSEWOOD FINGERBOARD made of nicely figured Maple old school thin skin nitro-lacquer Patina finish JVGutars. Aged finish by multiple tint colors to achieve the color that naturally occurs over time as witnessed by my restoration work on genuine vintage guitars it is complex learned over decades of restoration work here at Joes Vintage Guitars. SEE PICs Example pics the 3 necks we are listing the MIDDLE neck only the one with the roseowwd fingerboard. These are built by CnC machine for accuract then a lot of hand work to dial them in to play and feel like a well worn in old friend with 0 fret wear though.. Its made to look vintage but play more modern with a 21 fret truss rod adjusts at bottom heel – old school looking ST NECK with a more modern feel and improved plaibility ease of string bending etc with its MEDIUM C profile and a 9.5″ radius Indian rosewood fingerboard, 25.5″ scale length and medium frets this makes fror a great playing neck.. Fret ends are smooth and frets and edges are polished for a great feel. Tuner holes are 8’mm and it does come with an aged nut installed. Classic styling and patina aged finish as seen all 100% nitrocellulose instrument lacquer thin skin the old fashioned hand built hand finished neck with its cool 60’s. Will make a killer neck for your ST style project. New necks should be fit to the body by installer builder should be knowledgeable and experienced we recommendIf your body is accurate to vintage specs this will fit yours like a glove or you may employ shins to fit to others properly this is the responsibility of the builder putting your project together – fitment work. The installer fit it – you may need to sand to fit, set it up on body set it up adjust truss rod accordingly allow acclamation, you may desire to level frets – polish again after set up work has been done, this is standard procedure to get the maximum from your new neck project and is not considered a defect and is not returnable for that luthier installer should have this recommended knowledge for this reason if it was always easy everyone would be a builder it is a profession and often better left for the professionally skilled. This is for the Project guy to build an awesome professional grade guitar. JVGuitars Aka Joe’s Vintage Guitars Established in 1992 in N. More coming next month ask / reserve one.

]]> https://usedelectricguitars.org/2026/08/31/jvg-luthierbuilt-st-neck-aged-nitro-lacquer-patina-rosewood-fb-jvgutars/feed/ 0 https://usedelectricguitars.org/2026/08/29/standard-custom-diy-guitar-project-blue-burst-tiger-maple-mahogany-neck/ https://usedelectricguitars.org/2026/08/29/standard-custom-diy-guitar-project-blue-burst-tiger-maple-mahogany-neck/#comments Sat, 29 Aug 2026 20:48:00 +0000 https://usedelectricguitars.org/2026/08/29/standard-custom-diy-guitar-project-blue-burst-tiger-maple-mahogany-neck/























Standard Custom DIY Guitar Project, Blue Burst Tiger Maple, Mahogany Neck. Configuration: Solid mahogany body + tiger maple, mahogany neck, rosewood fingerboard with rosewood scale inlays – 5 missing shell inlays. Circuit chamber is complete; potentiometer holes and shifter holes, and the tailpiece lacks a positioning slot. 22-fret medium frets, 628mm effective distance. The neck and body have paint chips and scratches – see detailed photos. These cosmetic imperfections do not affect use.

]]> https://usedelectricguitars.org/2026/08/29/standard-custom-diy-guitar-project-blue-burst-tiger-maple-mahogany-neck/feed/ 0 https://usedelectricguitars.org/2026/08/23/jackson-guitar-maple-wood-neck-24-frets-maple-fingerboard/ https://usedelectricguitars.org/2026/08/23/jackson-guitar-maple-wood-neck-24-frets-maple-fingerboard/#comments Sun, 23 Aug 2026 08:32:41 +0000 https://usedelectricguitars.org/2026/08/23/jackson-guitar-maple-wood-neck-24-frets-maple-fingerboard/







Jackson Guitar Maple Wood Neck, 24 Frets Maple Fingerboard.

]]> https://usedelectricguitars.org/2026/08/23/jackson-guitar-maple-wood-neck-24-frets-maple-fingerboard/feed/ 0 https://usedelectricguitars.org/2026/08/17/coolz-ztl-m2r-used-alder-body-maple-neck-rosewood-fingerboard-red-withgig-case/ https://usedelectricguitars.org/2026/08/17/coolz-ztl-m2r-used-alder-body-maple-neck-rosewood-fingerboard-red-withgig-case/#comments Mon, 17 Aug 2026 08:20:41 +0000 https://usedelectricguitars.org/2026/08/17/coolz-ztl-m2r-used-alder-body-maple-neck-rosewood-fingerboard-red-withgig-case/







COOLZ ZTL-M2R Used Alder body Maple neck Rosewood fingerboard Red w/Gig case. Product: Shimamura Music’s original brand’COOLZ’. A Telecaster model with a heel-cut, medium scale body contour, designed for ultimate playability. The rosewood heel cut makes playing in the higher positions easy. Please also note that the results will not be shown for some countries or region due to lack of data. International Buyers – Please Note. Nothing other than what is shown in the photo and product description is included. Even if you think to yourself, But the item I want is only available in Japan. , make sure to consult with us before giving up hope. We will look for and suggest the best products on your behalf. Feel free to ask us any other items you need from Japan!! Don’t hesitate, just ask us.

]]> https://usedelectricguitars.org/2026/08/17/coolz-ztl-m2r-used-alder-body-maple-neck-rosewood-fingerboard-red-withgig-case/feed/ 0 https://usedelectricguitars.org/2026/08/14/v-shaped-electric-guitar-semi-finished-project-basswood-body-maple-neck/ https://usedelectricguitars.org/2026/08/14/v-shaped-electric-guitar-semi-finished-project-basswood-body-maple-neck/#comments Fri, 14 Aug 2026 08:14:49 +0000 https://usedelectricguitars.org/2026/08/14/v-shaped-electric-guitar-semi-finished-project-basswood-body-maple-neck/


















Configuration: Bass body, maple neck, rosewood fingerboard. Two HH humbucker pickups. CR silver semi-enclosed vintage tuning pegs. Screw holes for the pickguard.

]]> https://usedelectricguitars.org/2026/08/14/v-shaped-electric-guitar-semi-finished-project-basswood-body-maple-neck/feed/ 0 https://usedelectricguitars.org/2026/08/05/2006-maple-fender-starcaster-stratocaster-maple-neck-70s-headstock-very-good/ https://usedelectricguitars.org/2026/08/05/2006-maple-fender-starcaster-stratocaster-maple-neck-70s-headstock-very-good/#comments Wed, 05 Aug 2026 07:53:42 +0000 https://usedelectricguitars.org/2026/08/05/2006-maple-fender-starcaster-stratocaster-maple-neck-70s-headstock-very-good/











Fender 70’s Style Headstock. 2006 Starcaster Stratocaster by Fender. Maple Neck With Maple Fingerboard. Fingerboard is in excellent condition, and the frets have very minor dents that do not affect play in any way with a beautiful maple. Fingerboard with no sharp fret ends which is extremely rare on these models. Maybe a few scratches on the tuners and that’s about it. Truss rod is fully functional. And turns flawlessly and works as it should. Nicer Ping Style tuners, in excellent condition, fully tested and working properly. Full “C” profile vs. The “Modern C” in our opinion. Not too thin and not too thick. It is a genuine Fender part and will fit many projects easily. Thank you for your understanding! If any area has been altered, it will be clearly listed in the item description. Neck weighs 1lb 13oz with the original tuners. Full Size 21 Fret Neck, Rosewood Fingerboard (Heel Width 55.83MM). Factory Nut (Width 42MM). (4)Original Neck Screws (Saves Possible Problems On Your Project). 1st Fret Thickness 22.323MM. 12th Fret Thickness 22.97MM. Scale Length = 25.5 Fender Scale. Radius = 9.5 Modern – Full C (Approximate). Fender American Standard String Trees. Original Ping Style Tuners.

]]> https://usedelectricguitars.org/2026/08/05/2006-maple-fender-starcaster-stratocaster-maple-neck-70s-headstock-very-good/feed/ 0