https://usedelectricguitars.org Tue, 23 Jun 2026 05:40:50 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://usedelectricguitars.org/2026/06/18/selmer-london-lap-steel-1950-ohsc-working-order-vintage/ https://usedelectricguitars.org/2026/06/18/selmer-london-lap-steel-1950-ohsc-working-order-vintage/#comments Thu, 18 Jun 2026 17:30:48 +0000 https://usedelectricguitars.org/2026/06/18/selmer-london-lap-steel-1950-ohsc-working-order-vintage/










Up for sale is a beautiful vintage Selmer London lap steel guitar, dating back to circa 1950. A genuine piece of musical history, perfect for anyone looking for that authentic, warm 1950s tone. The instrument is in good overall condition. Being over 70 years old, it shows natural signs of use and age (wear, tear, and a beautiful vintage patina) that only add to its mojo and charm, without affecting its playability or sound quality in any way. Originality: The instrument is fully original (including the electronics), with the exception of two tuning keys which were replaced at some point to ensure stable and reliable tuning. Case: The original hardshell case is included. Like the guitar, the case shows visible signs of wear and tear consistent with its age, but it remains structurally sound and retains all its historical appeal. Please look closely at the photos, as they are a key part of the description. Feel free to contact me if you need additional detailed pictures (hardware, electronics, wear marks). I guarantee bomb-proof packaging, fully adequate for the historical value and delicacy of the instrument. This is a fantastic instrument, ready to be played in the studio or live, and a great addition to any vintage guitar collection.

]]> https://usedelectricguitars.org/2026/06/18/selmer-london-lap-steel-1950-ohsc-working-order-vintage/feed/ 0 https://usedelectricguitars.org/2026/06/05/jvg-st-body-nitro-lacquer-emerald-alder-closet-classi-order-it-jvguitars/ https://usedelectricguitars.org/2026/06/05/jvg-st-body-nitro-lacquer-emerald-alder-closet-classi-order-it-jvguitars/#comments Sat, 06 Jun 2026 04:29:45 +0000 https://usedelectricguitars.org/2026/06/05/jvg-st-body-nitro-lacquer-emerald-alder-closet-classi-order-it-jvguitars/








JVG- Luthier built ST BODY AGED Beautiful custom color in a Deep EMERALD Candy GREEN pearl shimmer metalic Nitrocellulose Lacquer paint. This listing is for like you see in my example pics its considered like a NOS look slightly aged by my lacquer subtil shading make it look to be aging this I call my Patina finish much like the closet classic line NOT BEAT UP OR RELICED. Average weight can vary from 3.8-4.5 pounds. IF youd like YOUR NOS guitar body Reliced with checking or to add just checking to your NOS body. To the finish let me know and we could add that in at time of order for nominal charge. Body as seen in my pics of one made in USA is an example of what you will receive in this listing is for you to place your order for JVGuitars to make it for you JVG-LuthierBuilt. For those wondering if you feel the checking on this boidy the answer is NO it feels smooth to the hand touch like a real vintage 60’s strat would feel. Same ntro lacquer aged finishes by JVGuitars in Northern California guitar restoration specialist since 1992 vintage guitars and used guitars sales and service and full restoration shop with a parts department in house. These are custom built by CNC then go threw further hand shaping to vintage spec deep sexy vintage contour body. This is a premium resonant body made of. 2 piece ALDER and is a light weight resonant wood with good tap tone ring. This will make a killer ST. This color is a DEEP EMERALD GREEN pearl lacquer in that all Nitro lacquer finish we have also used the famous old school under coat sealer tinted yellow same as Leo’s boys did back in the day (50s-60’s) these bodys are then thin skin top coated with nitro instrument lacquer and finish allows for woods natural grain to show threw thin skin shrunkin in for ultimate tone and is custom formulated by JVGuitars. Iv learned my painting skills from painting cars for decades now since 1970 at 14 years old (painted my 1st 1964 VW bug with my dads help) and I have learned all the different paint systems over the years as things changed painted dozens of custom high end cars trucks and bikes -helmets – guitars – even vintage furnature you name it for well over 40 years Iv been a Luthier since 1992. This ST body is built to std blueprint of the original parts can vary in size by a few MM between the body and fitting a neck often it is required of the guitar builder to “fit” the neck to a body and that is done by the assembler at time of building this is nothing new this is why “Mr Leo F ” would sand neck or pocket use shims and so on to fine tune adjust and or fit, this prep work is to be expected and should your neck or body require you the builder to make the final fit this is ordinary and not a defect and is not returnable for such reasons. This is a no nonsense listing, WHAT YOU SEE IS SIMILAR TO WHAT YOU GET… Body may be seen with a pickguard and other hardware and that is for example purpose only Pickguards and hardware is not included in this listing. Please check our other listings for our own great also UNIQUE REALISTIC looking aged pickguards for this guitar. I think you will dig our aged old white or aged green. Looks amazing over or aged patina finished bodys e of my FAVS! WOW WHAT A BEAUTY! Beautiful custom color Deep Emerald green shimmer. Someone will be very pleased. THEY ARE NOT US AND YOU WILL NOT GET THE ITEM SEEN…. They will fake that too They are CRIMINALS!

]]> https://usedelectricguitars.org/2026/06/05/jvg-st-body-nitro-lacquer-emerald-alder-closet-classi-order-it-jvguitars/feed/ 0 https://usedelectricguitars.org/2025/11/22/strat-body-relic-60s-nitrothinskinlacquer-flash-red-order-yours-jvguitars/ https://usedelectricguitars.org/2025/11/22/strat-body-relic-60s-nitrothinskinlacquer-flash-red-order-yours-jvguitars/#comments Sat, 22 Nov 2025 23:18:46 +0000 https://usedelectricguitars.org/2025/11/22/strat-body-relic-60s-nitrothinskinlacquer-flash-red-order-yours-jvguitars/












JVG- Luthier built ST BODY AGED Beautiful custom color This color is called Flash RED and it is nitrocellulose lacquer aged Patina classic finish. Body as seen made in USA is an example of what you will receice in this listing is for you to place your order for JVGuitars to make it for you JVG-LuthierBuilt. For those wondering if you feel the checking on this boidy the answer is NO it feels smooth to the hand touch like a real vintage 60’s strat would feel same intro lacquer aged finishes by JVGuitars in Northern California guitar restoration specialist since 1992 vintage guitars and used guitars sales and service and full restoration parts department in house. These are custom built first by CNC then further hand shaped to acheve weight relif vintage spec deep sexy vintage contour slightly thinner body to help us get the weight down to 2.2-2.8 pounds on average. This is a premium resonant body made of. 2 or 3 piece Palowania the grain pattern is great looks much like Ash and is a light weight resonant wood with good tap tone ring This will make a killer ST. This color is a Vivid FLASH RED lacquer in that all Nitro lacquer finish we have also used the famous old school under coat sealer tinted yellow same as Leo’s boys did back in the day (50s-60’s) these body’s are then thin skin top coated with nitro instrument lacquer and finish allows for woods natural grain to show threw thin skin shrunkin in for ultimate tone and is custom formulated by JVGuitars. Iv learned skills from painting cars for decades now since 1970 at 14 and I have painted dozens of custom high end cars trucks and bikes -helmets – guitars – vintage furnature you name it for well over 40 years Iv been a Luthier since 1992. This ST body is built to std blueprint of the original parts can vary in size by a few MM between the body and fitting a neck often it is required of the guitar builder to “fit” the neck to a body and that is done by the assembler at time of building this is nothing new this is why “Mr Leo F ” would sand neck or pocket use shims and so on to fine tune adjust and or fit, this prep work is to be expected and should your neck or body require you the builder to make the final fit this is ordinary and not a defect and is not returnable for such reasons. This is a no nonsense listing, WHAT YOU SEE IS SIMILAR TO WHAT YOU GET… Body seen with a pickguard and hardware is for example only Pickguards and hardware is not included. Please check our other listings for our own great aged pickguards for this guitar. I line aged white or aged green. Looks amazing over this bold blue one of my FAVS! WOW WHAT A BEAUTY! Beautiful custom color FLASH RED. THEY ARE NOT US AND YOU WILL NOT GET THE ITEM SEEN…. They will fake that too They are CRIMINALS! Someone will be very pleased.

]]> https://usedelectricguitars.org/2025/11/22/strat-body-relic-60s-nitrothinskinlacquer-flash-red-order-yours-jvguitars/feed/ 0 https://usedelectricguitars.org/2025/07/31/jvg-st-body-relic-60s-nitro-lacquer-candy-apple-green-order-here-jvguitars/ https://usedelectricguitars.org/2025/07/31/jvg-st-body-relic-60s-nitro-lacquer-candy-apple-green-order-here-jvguitars/#comments Fri, 01 Aug 2025 04:38:47 +0000 https://usedelectricguitars.org/2025/07/31/jvg-st-body-relic-60s-nitro-lacquer-candy-apple-green-order-here-jvguitars/













JVG- Luthier built ST BODY AGED Beautiful custom color in True CANDY APPLE GREEN Pearl Met our premium lightweight offering sexy deep 60’s style. Sorry this paint is a little more expensive process true candy base lacquer silver metallic with see threw candy green lacquer over that, patina aged lacquer over that. Limited time only only 10 this color! This listing is for a premium light weight average is in the mid 2’s US pounds resonant body made of. 3 piece Palowania the grain pattern is great looks much like Ash and is a light weight resonant wood with good tap tone ring routed HSH or SSH. Notice example pictures done with aged green pickguards and also aged white… Either way with a body like this. Put on a good looking aged pickguard to finish the job. Body as seen made here in USA is an example of what you will receice in this listing is for you to place your order for JVGuitars to make it for you JVG-LuthierBuilt. For those wondering if you feel the checking on this boidy the answer is NO it feels smooth to the hand touch like a real vintage 60’s ST would feel same intro lacquer aged finishes by JVGuitars in Northern California guitar restoration specialist since 1992 vintage guitars and used guitars sales and service and full restoration parts department in house. These are custom built first by CNC then further hand shaped to vintage spec deep sexy vintage contour body. This will make a killer ST. This color is a Candy apple green lacquer in that all Nitro lacquer finish we have also used the famous old school under coat sealer tinted yellow same as Leo’s boys did back in the day (50s-60’s) these bodys are then thin skin top coated with nitro instrument lacquer and finish allows for woods natural grain to show threw thin skin shrunkin in for ultimate tone and is custom formulated by JVGuitars. Iv learned from painting cars for decades now since 1970 at 14 and I have painted dozens of custom high end cars trucks and bikes -helmets – guitars – vintage furnature you name it for well over 40 years Iv been a Luthier since 1992. This body is built to std blueprint of the original parts can vary in size by a few MM between the body and fitting a neck often it is required of the guitar builder to “fit” the neck to a body and that is done by the assembler at time of building this is nothing new this is why “Mr Leo F ” would sand neck or pocket use shims and so on to fine tune adjust and or fit, this prep work is to be expected and should your neck or body require you the builder to make the final fit this is ordinary and not a defect and is not returnable for such reasons. This is a no nonsense listing, WHAT YOU SEE IS SIMILAR TO WHAT YOU GET… Body seen with a pickguard and hardware is for example only Pickguards and hardware is not included. Please check our other listings for our own great aged pickguards for this guitar. I line aged white or aged green. Looks amazing over this bold blue one of my FAVS! WOW WHAT A BEAUTY! THEY ARE NOT US AND YOU WILL NOT GET THE ITEM SEEN…. They will fake that too They are CRIMINALS! Someone will be very pleased.

]]> https://usedelectricguitars.org/2025/07/31/jvg-st-body-relic-60s-nitro-lacquer-candy-apple-green-order-here-jvguitars/feed/ 0 https://usedelectricguitars.org/2025/06/22/jazz-bass-body-nitro-relic-orangegold-premium-light-place-your-order-jvguitars/ https://usedelectricguitars.org/2025/06/22/jazz-bass-body-nitro-relic-orangegold-premium-light-place-your-order-jvguitars/#comments Sun, 22 Jun 2025 16:09:15 +0000 https://usedelectricguitars.org/2025/06/22/jazz-bass-body-nitro-relic-orangegold-premium-light-place-your-order-jvguitars/













JVG- Luthier built JAZZ Bass body as seen ORANGE GOLD MIST color THIS LISTING is a ORDER YOURS Listing a custom built by CNC then further hand shaped to vintage spec derp vintage contour body. This is old growth Palowinia 3 piece is our premium super lightweight under 3 lbs this is a highly resonant vintage woods we’ve been storing for 15 years and was 20 years old when we bought it. Finish checking is hard to show in pictures it is there front and back with aged patina throughout. This will make a killer precision bass. This color vintage aged ORANGE GOLD PEARL METALIC from our JVGuitars restoration shop same nitro paint I use to restore actual vintage guitars as Iv been doing since 1992. JVGuitars Iv been painting cars since 1970 and have painted dozens of custom high end cars over 40 years Iv been a Luthier since 1992. This is built to std blueprint of the original parts can vary in size by a few MM between the body and fitting a neck often it is required of the guitar builder to “fit” the neck to a body and that is done by the assembler at time of building this is nothing new this is why Fender would sand neck or pocket use shims and so on to fine tune adjust and or fit, this prep work is to be expected and should your neck or body require you the builder to make the final fit this is ordinary and not a defect and is not returnable for such reasons. This is a no nonsense listing, WHAT YOU SEE IS AN EXAMPLE of WHAT YOU WILL GET… Check out our other listings for our necks and our aged pickguards Body seen with a pickguard for example only Pickguard is not includedIF you prefer to get another custom color message Joe we have every classic 50s – 60’s Fender used in our restoration shopwe also have many custom blends pearls – metalics – Paisley’s you name itWOW WHAT A BEAUTY! Someone will be very pleased JVGuitars. THEY ARE NOT US AND YOU WILL NOT GET THE ITEM SEEN…. They will fake that too They are CRIMINALS!

]]> https://usedelectricguitars.org/2025/06/22/jazz-bass-body-nitro-relic-orangegold-premium-light-place-your-order-jvguitars/feed/ 0 https://usedelectricguitars.org/2025/05/20/p-bass-body-nitro-relic-oceanblue-aged-premium-liteweight-place-order-jvguitars/ https://usedelectricguitars.org/2025/05/20/p-bass-body-nitro-relic-oceanblue-aged-premium-liteweight-place-order-jvguitars/#comments Wed, 21 May 2025 03:18:43 +0000 https://usedelectricguitars.org/2025/05/20/p-bass-body-nitro-relic-oceanblue-aged-premium-liteweight-place-order-jvguitars/













P BASS BODY RELIC Ocean BLUE Pearl metalic aged with patina JVGuitars Reborn Old 2022. Place your order for us to build one just like this for you… This is a custom built by CNC then further hand shaped to vintage spec deep sexy vintage contour body. This is a premium resonant body made of. 3 piece Paulownia the grain pattern is great looks much like Ash and is a light weight highly resonant wood with very good tap tone ring to it. This will make someone a killer precision bass. This color is aged OCEAN PEARL BLUE PATINA AGED – Relic Body only not over the top and is an all Nitro lacquer finish what is known as ” Thin Skin” like vintage finish allows for maximum resonance and we cal Primitive you may see wood grain like a vintage 50’s and 60’s sometimes exibit is beautiful vintage looks. We have also used the famous old school under coat sealer tinted yellow same as Leo’s boys did back in the day (50s-60’s) these bodys are then thin skin top coated with nitro instrument lacquer and finish allows for woods natural grain to show threw thin skin shrunkin in for ultimate tone and is custom formulated by JVGuitars. Iv learned from painting cars for decades now since 1970 at 14 and I have painted dozens of custom high end cars trucks and bikes -helmets – guitars – vintage furnature you name it for well over 40 years Iv been a Luthier since 1992. This P BASS body is built to std blueprint of the original parts can vary in size by a few MM between the body and fitting a neck often it is required of the guitar builder to “fit” the neck to a body and that is done by the assembler at time of building this is nothing new this is why “Mr Leo F ” would sand neck or pocket use shims and so on to fine tune adjust and or fit, this prep work is to be expected and should your neck or body require you the builder to make the final fit this is ordinary and not a defect and is not returnable for such reasons. This is a no nonsense listing, WHAT YOU SEE IS NOT WHAT YOU GET… Body seen with a pickguard is for example only this listing is for the “body only”. Pickguards is not included but we offer them so ask if you want the best aged pickguard to go with your relic body. And Ill offer the buyers of our bodys I offer special pricing on the pickguards to you, need an aged neck to go with? Ask Joe I can provide a beauty for you just ask.. WOW WHAT A BEAUTY! When begin to build it once / after you have placed your order. This color is aged Olympic white turned bannaish as they say but not over the top and is an all Nitro lacquer finish. Someone will be very pleased JVGuitars. THEY ARE NOT US AND YOU WILL NOT GET THE ITEM SEEN…. They will fake that too They are CRIMINALS!

]]> https://usedelectricguitars.org/2025/05/20/p-bass-body-nitro-relic-oceanblue-aged-premium-liteweight-place-order-jvguitars/feed/ 0 https://usedelectricguitars.org/2025/04/16/jvg-st-body-relic-60s-nitrothinskinlacquer-apple-red-order-yours-jvguitars/ https://usedelectricguitars.org/2025/04/16/jvg-st-body-relic-60s-nitrothinskinlacquer-apple-red-order-yours-jvguitars/#comments Wed, 16 Apr 2025 14:02:54 +0000 https://usedelectricguitars.org/2025/04/16/jvg-st-body-relic-60s-nitrothinskinlacquer-apple-red-order-yours-jvguitars/












JVG- Luthier built ST BODY AGED Beautiful custom color in a true 3 stage Nitro formula old school This color is called APPLE RED and it is lacquer aged Patina classic finish. Body as seen made in USA is an example of what you will receice in this listing is for you to place your order for JVGuitars to make it for you JVG-LuthierBuilt. For those wondering if you feel the checking on this boidy the answer is NO it feels smooth to the hand touch like a real vintage 60’s strat would feel same intro lacquer aged finishes by JVGuitars in Northern California guitar restoration specialist since 1992 vintage guitars and used guitars sales and service and full restoration parts department in house. Ready for your next build! These are custom built first by CNC then further hand shaped to acheve weight relif vintage spec deep sexy vintage contour slightly thinner body to help us get the weight down to 2.2-2.8 pounds on average. This is a premium resonant body made of. 2 or 3 piece routed SSH Palowania the grain pattern is great looks much like Ash and is a light weight resonant wood with good tap tone ring This will make a killer STRAT. This color is a Vivid APPLE RED lacquer in that all Nitro lacquer finish we have also used the famous old school under coat sealer tinted yellow same as Leo’s boys did back in the day (50s-60’s) these body’s are then thin skin top coated with nitro instrument lacquer and finish allows for woods natural grain to show threw thin skin shrunkin in for ultimate tone and is custom formulated by JVGuitars. Iv learned from painting cars for decades now since 1970 at 14 and I have painted dozens of custom high end cars trucks and bikes -helmets – guitars – vintage furnature you name it for well over 40 years Iv been a Luthier since 1992. This STRAT body is built to std blueprint of the original parts can vary in size by a few MM between the body and fitting a neck often it is required of the guitar builder to “fit” the neck to a body and that is done by the assembler at time of building this is nothing new this is why “Mr Leo F ” would sand neck or pocket use shims and so on to fine tune adjust and or fit, this prep work is to be expected and should your neck or body require you the builder to make the final fit this is ordinary and not a defect and is not returnable for such reasons. This is a no nonsense listing, WHAT YOU SEE IS SIMILAR TO WHAT YOU GET… Body seen with a pickguard and hardware is for example only Pickguards and hardware is not included. Please check our other listings for our own great aged pickguards for this guitar. I line aged white or aged green. Looks amazing over this bold blue one of my FAVS! WOW WHAT A BEAUTY! Beautiful custom color true CANDY APPLE RED. THEY ARE NOT US AND YOU WILL NOT GET THE ITEM SEEN…. They will fake that too They are CRIMINALS! Someone will be very pleased.

]]> https://usedelectricguitars.org/2025/04/16/jvg-st-body-relic-60s-nitrothinskinlacquer-apple-red-order-yours-jvguitars/feed/ 0 https://usedelectricguitars.org/2024/12/19/gibson-custom-shop-special-order-les-paul-axcess-standard-flame-baby/ https://usedelectricguitars.org/2024/12/19/gibson-custom-shop-special-order-les-paul-axcess-standard-flame-baby/#comments Thu, 19 Dec 2024 20:16:43 +0000 https://usedelectricguitars.org/2024/12/19/gibson-custom-shop-special-order-les-paul-axcess-standard-flame-baby/











Custom Order Les Paul Axcess with stop bar tail piece. Has push pull pots on the tone knobs. Frets are like new. Super light at approx 7 lbs. Made in the USA. Les Paul Custom Top/Back. Custom Axcess Contoured Heel. 1.687 (42.85mm). 24.75 (628.65mm). Long Tenon, Hide Glue Fit. Mother of Pearl Custom. 2 500K Push-Pull Pots for Tone Control and Coil Splitting, 2 500K Pots for Volume Control. Light Weight w/Long Stud, Anchor.

]]> https://usedelectricguitars.org/2024/12/19/gibson-custom-shop-special-order-les-paul-axcess-standard-flame-baby/feed/ 0 https://usedelectricguitars.org/2023/10/31/sago-sonia-custom-order-model/ https://usedelectricguitars.org/2023/10/31/sago-sonia-custom-order-model/#comments Tue, 31 Oct 2023 19:13:59 +0000 https://usedelectricguitars.org/2023/10/31/sago-sonia-custom-order-model/












Small body shape designed for Japanese people. The slightly slanted design provides a good hold, and the deep cutaway makes it easy to access the high frets. It has a 2-piece ash body and a 22-fret maple neck/Honduras rosewood fingerboard.

]]> https://usedelectricguitars.org/2023/10/31/sago-sonia-custom-order-model/feed/ 0 https://usedelectricguitars.org/2023/07/18/tele-body-60s-nitrothinskinlacquer-3-tone-sunburst-nos-order-here-jvguitars/ https://usedelectricguitars.org/2023/07/18/tele-body-60s-nitrothinskinlacquer-3-tone-sunburst-nos-order-here-jvguitars/#comments Tue, 18 Jul 2023 07:24:46 +0000 https://usedelectricguitars.org/2023/07/18/tele-body-60s-nitrothinskinlacquer-3-tone-sunburst-nos-order-here-jvguitars/










JVG- Luthier built TELE BODY NOT AGED Beautiful stunning grain looks a lot like ASH and under 3 pounds ultra premium lightweight. THIS IS FOR NON RELIC this is for NOS new old stock condition think skin finish just no relic work. I call this Primitivo THIN SKIN You see the wood grain and lacquer shrunken in beautifully vintage looking relic. ULTRA PREMIUM LIGHTWEIGHT BODY under 3 lbs! THIS LISTING IS FOR NOT AGED NOS. ANYTHING YOU READ BELOW ABOUT AGING OR STRAT DOES NOT APPLY WAS TRANSPOSED FROM ANOTHER LISTING TITLE OF THIS LISTING. THIS LISTING IS FOR YOU TO ORDER YOURS. IT TAKES 30 days as per listing. If you do want an aged relic please contact Joe or visit one of our other listing for that. Thanks for your interest. Notice example pictures done with aged green pickguards and also aged white… Either way with a body like this. Put on a good looking aged pickguard to finish the job. Please disregard the dust on the guitar the digital camera shows everything that dust wipes right off. Please note the checking in some of the close ups. No parts come with this body they are shown just for visualization for an example only “body wood the strat body is offered” check our other listings for the most realistic aged pickguards. Body as seen made in USA is an example of what you will receice in this listing is for you to place your order for JVGuitars to make it for you JVG-LuthierBuilt. For those wondering if you feel the checking on this boidy the answer is NO it feels smooth to the hand touch like a real vintage 60’s strat would feel same intro lacquer aged finishes by JVGuitars in Northern California guitar restoration specialist since 1992 vintage guitars and used guitars sales and service and full restoration parts department in house. These are custom built first by CNC then further hand shaped to vintage spec deep sexy vintage contour body. This is a premium resonant body made of. 2 piece Palowania the grain pattern is great looks much like Ash and is a light weight resonant wood with good tap tone ring This will make a killer STRAT. This color is a Candy apple green lacquer in that all Nitro lacquer finish we have also used the famous old school under coat sealer tinted yellow same as Leo’s boys did back in the day (50s-60’s) these bodys are then thin skin top coated with nitro instrument lacquer and finish allows for woods natural grain to show threw thin skin shrunkin in for ultimate tone and is custom formulated by JVGuitars. Iv learned from painting cars for decades now since 1970 at 14 and I have painted dozens of custom high end cars trucks and bikes -helmets – guitars – vintage furnature you name it for well over 40 years Iv been a Luthier since 1992. This JBass body is built to std blueprint of the original parts can vary in size by a few MM between the body and fitting a neck often it is required of the guitar builder to “fit” the neck to a body and that is done by the assembler at time of building this is nothing new this is why “Mr Leo F ” would sand neck or pocket use shims and so on to fine tune adjust and or fit, this prep work is to be expected and should your neck or body require you the builder to make the final fit this is ordinary and not a defect and is not returnable for such reasons. This is a no nonsense listing, WHAT YOU SEE IS SIMILAR TO WHAT YOU GET… Body seen with a pickguard and hardware is for example only Pickguards and hardware is not included. Please check our other listings for our own great aged pickguards for this guitar. I like an aged white or aged green pickguard for these bodys. Looks amazing over this bold blue one of my FAVS! WOW WHAT A BEAUTY! Someone will be very pleased.

]]> https://usedelectricguitars.org/2023/07/18/tele-body-60s-nitrothinskinlacquer-3-tone-sunburst-nos-order-here-jvguitars/feed/ 0