Haywire Custom Guitars Inc. One of the main functions of a Custom Guitar Shop should be to hit the target the first time by building as close to a perfect instrument as possible! At Haywire our aim is getting better every day! The job is only complete when you are completely happy with your guitar because you’ll use it every day. It needs to be comfortable and light-weight enough to play for hours at a time in any situation without fatigue. The sound has to be clear and tone-great. It has to be built to withstand the rigors of being on the road whether touring or playing in local venues. It has to feel good to you when you play it. The action and feel need to be consistent all the way down the neck so you won’t be forced to alter your playing technique as you travel around on the fret board. A guitar players instrument needs to be in tune on every fret so we pay careful attention to the intonation settings. It has to look good for you and represent your sense of style. The finish has to last for a long time to protect the wood from absorbing moisture from the atmosphere as well as sweat from direct contact with hard working hands. The neck needs to have a truss rod that is easy to adjust for seasonal variations in temperature as well as the ability to transmit sound and add extra sustain for players. Strings added need to be a comfortable gauge without too much resistance thus making it easier to push down to the crown of the frets. These are just some of the things that we think about every day to make sure we get it exactly right for guitar players who need a great instrument for their passion-PLAYING GUITAR!! We’re building satisfied players….. One Haywire Guitar at a time! This Guitar listed, upgraded, customized and modified by. Call or write with any questions you may have. Home of the “Gig Ready” Guitar! Deluxe Bigsby Style Telecaster. Comfort Cut body contour in back. Neck and Bridge pickups! + Bigsby Style Tremolo System + Custom neck installed. All frets leveled and re-crowned. Fret ends dressed for a broken in feel. Fret size: Dunlop 6150 Nut width: 1-11/16. Haywire Custom Shop All Maple Neck includes: New Tuners, Nut, Strings and Full Set-Up. Low action and intonation set just right. Variable Treble Bleed Circuit included: This mod keeps the tone you have on “10” throughout the entire range of the volume control. We add a resistor capacitor network to the input and output of the volume control to keep the highs from leaving your tone as the volume is decreased. By adding this circuit we can help you avoid the “muddy-tone” syndrome. Now your tone is much more controllable and articulate! Variable tone treble Bleed circuit has been installed for you. The Haywire Treble Bleed Circuit is included. The Treble Bleed is hand-soldered here in our shop: between the input and output lugs of your guitar volume control pot, to smooth out treble bleed. Get uniform tone from 1 to 10, and a more rounded and concise audio at low volume. Turning the volume control applies varying amounts of a specially tuned high frequency filter to ALL pickups. On Humbuckers (either North or South or both coils can be filtered). This variable treble bleed circuit is now installed. This variable treble bleed/bypass circuit corrects the problem of high frequency losses. Provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10. Specially voiced selected custom guitar pickups that deliver. Masterful tone, overdrive, clarity. Dynamics, transparency, versatility & balanced tonal response. Black Pick Guard, 3 way switching and 6 Saddle T-O-M Bridge. Deluxe Tele with New Electronics. Custo m finished Telecaster….. American Deluxe refinished Fender Tele body. This Body is in Perfect Shape and will fit. Fender and Warmoth 21 fret necks! This NEW TELECASTER Loaded Body is Ash. The body finish is New! Please don’t ask us to sell the guitar without the electronics-they’re included free. All hardware, pickups, strap knobs, electronics, switch. INCLUDED and installed on body at NO CHARGE. Listed, upgraded, customized and modified by. 8433475742 Haywire Custom Guitars. 2 New SRV Pickups, new electronics and new finish! SRV – Bridge and Neck Tele Pickups are installed. For fat clean tone or harder driving rock with more grind. Neck and bridge will be equal, or bridge slightly hotter when playing single notes. It allows you allows you to roll off your volume without losing the highs. Would you like being able to use the volume control… With a Treble Bleed Circuit Mod. As you turn your. Guitar’s volume down. The pot allows some of the current to go to ground as opposed to the output. Frequencies that leave first are the highs. Which leave the tone muddy and obscured without an “edge” on it to a discerning ear. Haywire Treble Bleed Circuit. This circuit is now installed. You’ll now have uniform tone from 1 to 10, and a more rounded sound at low volume. It prevents the treble frequencies from bleeding off. It allows the treble frequencies to be re-introduced into the output for clarity and improved timbre. At Haywire we simply install a Treble Bleed Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum. 1- error-correction of signals with enhanced clarity. 2- preserve high end frequencies. 3-improved taper when rolling back your volume control. Get more uniform tone from 1 to 10, and a more rounded sound at low volume. We want players to have the best possible tools and will be happy to provide them. So, to put to rest any question-YES the neck in the above photo AND in the description is included on this guitar with the option to have it changed out to another shape and size if there are special circumstances and/or physical limitations that require a guitarist to need a different neck profile whether for comfort or playability. The neck is styled after the Les Paul 1959 Roundback. Similar to: 1959 Gibson® Les Paul®. Thickness at 1st Fret. Thickness at 12th Fret. The 59 Roundback is based on early Les Paul® neck dimensions. It is also the neck profile most similar to the PRS® neck shape. This Guitar Neck Fingerboard Radius is 12. The fingerboard, or playing surface of the guitar neck, is usually curved or radiused across its width. The purpose of this radius is to accommodate the natural ergonomic shape of your fingers when they are in playing position. Comfort is certainly a major factor in selecting a fingerboard radius but it is not the only factor. The fingerboard radius must also allow you to play the style of music you prefer. However-If you’d like to send us your OWN neck, we’ll add it with: strings, set it up, set truss rod, action and intonation. Then we’ll pay additional weight and size surcharges and return the whole guitar back to you for 89 bucks gig ready! All hardware, pickups, strap knobs, electronics, switch : INCLUDED and installed on body: No Charge. The Neck Pick-Up specs. The Bridge and Saddles on this Guitar Body. 6 Saddle T-O-M Bridge. PLUS: OPTION to substitute a. Custom Neck with your specs! Every guitar player is different and so are his/her hands. It is not a “one size fits all” world. Because of this there is no perfect guitar neck shape for everyone. Your neck profile should make it easy for you to comfortably reach all the frets. Bottom line: Neck profile and neck width is important; so pay attention to what feels right for you so WE can get it right for you because ONLY YOU know what feels right for you. At Haywire Custom Shop our job is to have the right guitar matched up with the right hands. We’re, “musicians working for musicians”. We’ll Install a NEW fretted, Finished Warmoth Neck for you! Your specs as well as super wide and fat guitar necks to thin and slim! Choose your specs below from a super wide and fat guitar neck to thin and slim or anything in between! Maple-Satin Nitro Lacquer finished. Right Handed with standard Strat or Telecaster Headstock- your choice! White Corian or Black tusq- your choice! Standard thin or your choice. 6105 Stainless Steel Frets or your choice. See more about our guitars and models on the Haywire Website. We are experts in the area of Custom Guitar setup, installation, repair, neck fretting, neck refinishing, neck fitting, alignment, and action adjustment and neck design. Be ready to make any adjustments necessary to make your project work with any necks and make the necessary adjustments. If you feel that you don’t have the skill in working with wood or guitar mods-please don’t feel bad, instead-send us your project parts, we can do it, and we’ll finish it for you. This is an excellent instrument for a serious player. If you take your playing seriously then take a great guitar to the gig with you. This instrument is very sweet and will serve you, the professional player, for many years to come. You practice hard and you work hard on your playing! Get a great tool to work with! No roadblocks to your success as a guitarist! Haywire Custom Guitars 8-point gig ready guitar process.. The 4-axis Alignment of the guitar neck. Each guitar neck is checked and adjusted to insure that it is true and straight to insure proper alignment on all axis. This step insures proper action and allows for more accurate and easier guitar tuning, playing and set-up in the following steps. Inspect and Lube the guitar tuning gears. Before installing the guitar tuning gears, each one is checked thoroughly. Each tuning gear is adjusted-there is no play in the mechanism. They are then lubricated to insure smooth and even movement to make your guitar tune accurately. Potting the guitar pickups -We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback. Prep the guitar body -Before installing the guitar electronic components, great care is taken to insure that all wires are properly routed, spaced, and grounded to insure years of trouble free service with your guitar. Level and polish the frets -This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness. Radius the guitar strings -Most guitar necks have a contour over the top of the neck. We adjust the strings to make sure that height of each string follows the contour of the guitar neck. Adjusting the overall guitar string height and the action. Once we set the contour and radius of the guitar strings, then to adjust the overall height of the strings from the top of the frets to the bottom of the strings. Set the guitar intonation -This step is done twice. The intonation is set two times with a 24 hour seat-in period in between to allow the guitar to properly re-seat to the new adjustments. Haywire Custom Guitars is a unique Custom Shop of craftsman where we modify guitars from many manufacturers. We alter instruments to individual or personal specifications and offer the resulting upgraded instruments for sale. We are not a Gibson, Epiphone, Washburn, Wilkinson, Parker, Carvin, BC Rich USA, Jackson, PRS, Ernie Ball, Warmoth or Fender dealer nor are we affiliated with any of these companies. We upgrade electronics, necks, hardware and finishes and offer the finished products for sale. Fender, Stratocaster, Telecaster and Gibson, Les Paul, Buzz Feiten and related marks are trademarks of Fender Musical Instruments, Gibson, Buzz Feiten respectively and/or their affiliates. All other trademarks or registered trademarks referenced in this site are the property of their respective owners. The guitars we specialize in rebuilding, changing, refurbishing and setting up are instruments with replaceable necks and bodies because we have more requests to add, change and modify these instruments more than any others. We do not build Fender guitars we add value to them in our “8 Point Gig Ready Process” or other modifications requested by our customers from time to time. We do however, replace and upgrade parts as required. As noted above several examples include: Gibson, PRS, Jackson, Bigsby®, G&L, The Bigsby® mark and Bigsby tailpiece designs are registered trademarks of Fred W. And many other brands as noted above and alter these and re-sell them as refurbished instruments. We change necks from one guitar to another to find the best combination. We do not and will not copy or build knock -off products of other companies. We do not do anything that would dilute the brand of these manufacturers. Therefore, in the event that occurs, we reserve the right to use a “substitute item”. The item we can substitute will be comparable and of like kind, quality and and/or in many cases, greater value. Since we do not manufacture signature brand items we rely on the descriptions provided by our suppliers. We will not knowing sell the wrong products or parts. The photos on The Haywire Custom Guitars website are taken by us and are all types of guitars that have passed through the Haywire Custom shop at one time or another for service and/or modification as requested by the original owner or as determined to be necessary to bring the instrument up to an extremely comfortable and playable state as well as intoned as necessary. The item “Fender Deluxe Telecaster+SRV’s+Bigsby Style Trem+Custom Neck-Modified By Haywire” is in sale since Tuesday, October 10, 2017. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Electric Guitars”. The seller is “haywirecustomguitars” and is located in Conway, South Carolina. This item can be shipped worldwide.
- Brand: Modified Fender Telecaster Deluxe Body
- Model: Telecaster American Deluxe body in Black
- MPN: none does not apply
- Body Type: Solid
- String Configuration: 6 String
- Body Color: Black
- Body Material: Comfort cut body contour in back
- Country of Manufacture: United States of America
- Style: Custom Shop Modified Deluxe style body Telecaster
- Series: American-Haywire Custom Guitars Modified
- Instrument: Fender Electric Guitar Modified by Haywire Shop
- Type: Fender Telecaster + SRV +Contoured back
- Hand: Right
- Telcaster Haywire Customized: Haywire Custom Guitar Shop Modified Telecaster
- Country/Region of Manufacture: United States
- Dexterity: Right-Handed
- Model Year: 2014
- Features: Bigsby style Tremolo
- Size: Full Size
- Items Included: Comfort cut body contour in back
- Comfort cut body contour in back: Neck, tuners, treble Bleed circuit,setup, strings included