This guitar is used but in excellent condition! It shows minor cosmetic wear including a small chip in the lower back of the body and scattered tiny marks and surface blemishes.
International Buyers – Please Note. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Jimmy Wallace “Keith” TE-type Aged-finish Black 2018 [60643]. The 2018 Jimmy Wallace Guitars Keith Relic is now in stock! The item shown in the image includes all accessories. The truss rod, remaining fret life, and string height are the settings as determined during setup and adjustment at our repair center. This is a one-of-a-kind item. Since this item is listed on multiple marketplaces, we strive to remove product listings promptly upon sale, but updates may not be in real time. Condition: B+: Some minor scratches, but no issues for normal use Serial Number: 60643 Year of Manufacture: 2018 Country of Manufacture: USA Case: Genuine included hard case Accessories: Specification card (Date: 12/19/18), hard case key Weight: 3.17 kg Truss Rod: No issues; checked up to 60 degrees left and right with no problems Fret Wear: Within normal range; fret height is sufficient for playing String height (low string side): 2.0 mm at the 12th fret String height (treble side): 1.5 mm at the 12th fret Nut width: 41.6 mm Neck thickness near the 1st fret: 21.7 mm Neck thickness near the 12th fret: 24.5 mm Scale: 648mm (25.5″) Radius: 241mm (9.5″) Strings at setup: ERNIE BALL 2221 /. 010.046 set Repairs/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment Other: We have received a 2018 Jimmy Wallace Guitars “Keith” (T-Type) with an aged finish. The one-piece maple neck features a traditional C-shaped profile and a 9.5 fingerboard radius. The body is crafted from incredibly lightweight ash, resulting in a total weight of 3.17 kg. The aging finish is more intense than typical relic or aged finishes, giving it a look closer to heavy aging. Fortunately, this specific model can be viewed on the official U. Website under “Out of Stock” (as of May 7, 2026). Since it is virtually identical to its original condition upon completion, you may not notice any significant progression in the damage. There is no noticeable wear on the frets; you may notice slight signs of wear, but since there are no deep or sharp wear marks, it likely wasn? Ft subjected to frequent playing or heavy use. There are no irregularities in the soldering work on the control wiring, so it appears to be in original, solder-virgin condition, including the pickups. Pickups: Neck: Jimmy Wallace PAF, Bridge: Jimmy Wallace 50? Fs T-style As this is a used item, there may be scratches, dents, or other imperfections that are difficult to capture in photos or not listed here. Please be aware of this in advance. Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity. This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Thank you for your understanding. Condition : Some scratches, dents and marks. Accessories: Please confirm the picture. Precautions for electronic instruments that use a power supply The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday. Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. More information please confirm our shop policy. EMS and DHL are safe, fast approx. 4 to 14 days worldwide, and fully insured. If you have a preferred choice of courier (which you have your own account for) and would like to use that courier, you may talk to one of our International Sales Agent directly. You received the wrong item: You received a different item than what you ordered. We would of It is extremely rare that we send the wrong item but in case it happens, course take it back. Please be as specific with the details as possible. Do not discard any of the packaging, manuals, papers, parts or accessories the item has been supplied with, and in particular, please do not remove protective film from any of the instruments pickups, pickguards, control plates, etc. We will gladly provide our expertise beforehand to make your decision easier. Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 12 stores around Japan including Tokyo, Yokohama, Nagoya, Osaka, Hiroshima and Fukuoka. We are open from 11:30am until 8:30pm (Tokyo time zone) 7 days a week. See More Vintage Musical Instruments.
Guitar neck fingerboard corrector, or Heating tool electric guitar neck deformation, bending correction straightening tool. Product Name: Guitar Neck Fingerboard corrector. Product application: It is used to correct the bending and deformation of the fingerboard of the guitar neck. It is suitable for all kinds of guitars, including basses, and can be used for overall neck correction or local correction. Product usage: Before calibration, you can adjust the neck steel bar to the middle position where no force is applied. According to the position of the neck deformation and distortion, the entire neck can be corrected. Local deformation correction is also possible, and the specific adjustment should be made according to the actual situation. Tighten the loosening screws of the corrector. Depending on the degree of deformation, it can be corrected in stages and multiple times to avoid excessive deformation in one correction, which may cause the neck fingerboard to crack. According to the degree of neck deformation and the temperature and humidity of the surrounding environment, you can adjust the temperature by yourself. Generally, a temperature range of around 60°C to 120 °C is acceptable. The correction time can be controlled by yourself according to the temperature you set or the degree of neck deformation. Generally, it takes tens of minutes or several hours.
The Vintage LP Style Guitar in Spalted Wood Maple/Mahogany Transparent Blue is a beginner to intermediate -level electric guitar player. A real Rocker, Jazz, country styles. Designed for right-handed players. Featuring a solid body made of mahogany with a transparent blue finish, this unique guitar has a maple neck and rosewood fretboard, providing a rich and warm tone. It includes 22 frets, making it ideal for beginners looking to learn and improve their guitar skills. The set also includes a strap and gig bag, ensuring easy transportation and support during performances. This was painted long ago, by unknown Artist. A rough refinished, something you do whatever you want to. Lots of wear and tear and Scratches All from general use See Pictures. This is a players guitar. This is setup low strings height and easy to play. But May need setup for your liking.
Spruce Wood Top Full Hollow Body Jazz Guitar DIY Project. Body Thickness: 69.7MM. Spruce plywood top, maple plywood back and sides, double F-shaped perforations, fully hollow thick body, multi-layer celluloid edging on the front and back. The body is unpainted and requires further processing; minor scratches, dents, and other imperfections are present. The picture shows the actual product. Stock Items, will go with surface Dirty, Paints&Wood Damages, Cracks, Scratches.
