Animals Pedal Custom Illustrated “unknown:rainfx:ap:Rin” pedal in good working condition. Has seen very little use. Comes with Original Box. This is essentially a custom illustrated version of the Push and Pull Distortion. Push and pull description:When you think of electric guitar, isn’t the first sound that come to mind a rock sound with a rich distorted tone as heard in the late 70s/early 80s? The so-called “brown sound” from California was a vintage UK-flavor style amp with distortion and is an icon of the guitar world. To get that exact sound would require thousands of dollars of gear – or you can try our PUSH & PULL DISTORTION (PNPD). The PNPD is a distortion pedal that helps create that classic “brown” sound from the early 80s with a nice thick texture, and it is designed to be used with clean amplifiers. Plug in and HIT IT to see immediately how this pedal can transform your sound. It’s easy to play, gives a nice edge to rhythm playing, and helps you play legato lines effortlessly. Peel off licks with high-speed picking and hear every note clearly defined. The tone shines even with heavy gain, and you can hear each note in the chord. Use the PNPD also as a booster or preamp by rolling down the gain, adjusting the Tone to taste, and cranking up the level to pummel the input preamp of your guitar amp. Check out our top-notch construction and industry standard parts selection. Let Animals Pedal bring out the animal in your playing! ControlLEVEL: Adjusts the overall volume. DRIVE: Adjusts the strength of the distortion. TONE: Adjusts the tone centered on the high frequencies. PUSH & PULL DISTORTION ADOPTS TRUE BYPASS FOOTSWITCH AND DRIVES WITH A 9V BATTERY OR A STANDARD CENTER-MINUS DC 9V ADAPTER. SpecificationsCurrent consumption: 0.5mAInput impedance: 500K ohmOutput impedance. Animals Pedal Custom Illustrated “unknown:rainfx:ap:Rin” pedal. In good working condition. Push and pull description: When you think of electric guitar, isn’t the first sound that come to mind a rock sound with a rich distorted tone as heard in the late 70s/early 80s? The PNPD is a distortion pedal that helps create that classic “brown” sound from the early 80s with a nice thick texture, and it is designed to be uséd with clean amplifiers. Control LEVEL: Adjusts the overall volume. Specifications Current consumption: 0.5mA Input impedance: 500K ohm Output impedance. When using batteries, please unplug the input jack to reduce battery consumption when storing the effector. Also, if you don’t use it for a long time, please remove the battery and store it. Sorry, our items are NOT available for pick-up. No additional information at this time. You might also like. BAC Audio Stomp ACE Phaser w/Box. M-Audio Producer USB Mic/Stand. Yamaha R100 Reverb Processor. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Electric Guitars”. The seller is “ninjapedals” and is located in this country: US. This item can be shipped worldwide.
- Type: Electric Guitar